Attentions should be paid when stopping the hot-water stove: hot-water stove is a hot-air stove for hot-water production. It refers to a kind of thermal energy equipment that uses the heat energy released by fuel combustion or other heat energy (such as electric energy, solar energy, etc.) to heat water to the rated temperature. So what do we need to pay attention to when intermittent heating is used for hot air stove heating? Now let's have a look with me. （1）停止供暖时，如属正常停炉压火，应先停运鼓风机，再停运引风机，停止供煤，但循环水泵不能停运。因水泵停运可造成炉水汽化，水泵仍需继续运转。当系统水温降至50-60℃以下时，再停循环水泵。如间歇供暖间隔较短也可不必停运循环水泵。
(1) When the hot blast stove stops heating, if the stoppage is normal, the blower should be shut down first, then the induced draft fan should be shut down and the coal supply should be stopped, but the circulating water pump can not be shut down. Because the water pump shutdown can cause the boiler water vaporization, the water pump still needs to continue to operate. When the water temperature of the system drops below 50 - 60 C, the circulating pump is stopped again. If the intermittent heating interval is short, the circulating pump may not be shut down.
(2) When starting the furnace again, the circulating water pump should be opened first, so that the water in the system can reach normal circulation, then the induced draft fan and blower should be opened, the grate and the coal feeding system should be started, and the coal seam combustion should be gradually restored. When the stopping time is longer and the pressure furnace needs to be pressed, it is better to cover the thicker coal seam after the coal seam burns well and the slag is removed.
Above are the matters needing attention when stopping and opening hot water stove. I hope everyone can safely use hot water stove.
Hot Air Boiler Price
2. Which is the best place for customers to buy biomass hot stoves?
At present, there are more than 500,000 industrial hot stoves in China. The annual coal consumption is about one third of the total national coal consumption. The environmental pollution caused by coal-fired industrial hot stoves is very serious. A large number of industrial hot stoves must be replaced by clean energy. At the same time, it will affect the price of hot air boiler. According to the conditions of biomass resources in our country, using agricultural and forestry residues as hot stove fuel is environmentally friendly and renewable. Studying biomass combustion technology of industrial hot stove and developing biomass fuel hot stove are of positive significance for saving conventional energy, optimizing energy structure and reducing environmental pollution. So, which is the best biomass hot stove? What are its advantages?
(1) Complete variety
Biomass-fired hot stove series models: HLG type, DZL type, SZL type, DZg type, DZC type.
(2) Fully automatic operation
The system shows in Chinese that the information is exchanged with the users of hot stove by means of man-machine conversation to realize full automatic and reliable operation, and the feeding, combustion and water supply of hot stove can be fully controlled.
(3) Multiple advantages
1. environmental protection;
2. Rich resources;
4. The bottom of operation cost;
5. Convenient storage;
6. Easy to manage;
7. Easy maintenance.
标签:   热风炉 热风炉厂家 生物质热风炉 燃气热风炉 热风炉价格